Professionalism is at our core. All Visual installers will treat your home with care and ensure that every installation is done to the highest standard..


A perfect installation begins with a perfect survey. A Visual surveyor will check over your property and the proposed plans and take accurate measurements for manufacture.

As well as determining that the structural openings and their surroundings are in good condition, the surveyor will also ensure your chosen styles and designs are suitable.

Installation Focus - Surveying


The installers will take great care when working on your home. They’ll lay dust sheets down and move any valuable to prevent them from being inadvertently damaged.

Once the work has been completed, the installers will clean up and mess and debris.

Visual - Care & Attention


Your existing frames, including any old sealant and debris, will be carefully removed. Where possible, any waste materials will be recycled.

At this point, your new frames will be carefully put into place before being secured to ensure a perfect installation befitting Visual.

Installation Focus - Fitting


The glazed units will be put into position before beading is tapped into place. If any trims are required, these will be measured and fitted too.

The frame and the glass will be thoroughly cleaned to remove any dirty. Then, a final layer of sealant will be applied between your new frame and the wall.

Installation Focus - Glazing


To finish, our expert install team will give all the surfaces another clean before adding a final layer of silicone between the frame and the surrounding brickwork to ensure a watertight finish.

Once that has been done, you can stand back and admire your brand-new Visual installed windows!

Visual - Care & Attention


We’d love to see you in our Mirfield showroom, where you can sit down with one of our very experienced consultants and chat through all the requirements you have.



If you have a query or issue about any of our products or services you can contact the Customer Services team by completing the form below.

Your details
Enquiry type
Content Block
  • This field is for validation purposes and should be left unchanged.

Want to speak with an Advisor? Give us a call on 0800 542 0165

Our friendly team will be pleased to help with any questions you may have.